320 VDC @ 10 Joules (min) firing energy (max output 340 VDC @13 Joules)
Capable of firing a minimum of 75 EBCs connected via 3000 of two-conductor 18 ga. copper firing line (tested through 340 ohms)
Uses standard 9-Volt battery (included)
Built-in bridgewire testing circuit
Less than 800 µA (micro amps) maximum current draw, barely 1/60th the maximum allowable safe testing current of 50 mA, as established by MSHA.
Testing circuit protected by 50mA fuse
The ONLY blasting box featuring a built-in haptic (tactile feedback) bridgewire continuity tester
Strong vibrating response provides positive indication, even in direct sunlight and noisy environments
LED visually confirms continuity and indicates a low-battery
Small and lightweight
3.5 wide x 6.5 long x 1.2 thick; 11.5 ounces (with battery) (8.9 cm x 16.5 cm x 3 cm; 326 g)
Easy to use
Connect firing line to high-voltage binding posts
Hold down ARM switch to charge blasting circuit
Once the Super-Bright Ready LED lights solid (flashes during charge), press FIRE button to send high-energy pulse down firing line
Intrinsically safe design
Internally shunted output terminals help protect EBCs from stray EMI remain shunted until instant of firing
Auto abort discharges the capacitor upon release of ARM button (prior to firing)
Bridgewire testing circuit current is less than 1 mA (795 microamps average)
Fuse protected testing circuit cannot provide more than 50 mA (serial numbers 100+)
Touch-proof output terminals with downward facing inputs reduce risk of shock
Rugged enclosure
Black ABS case with bright-red/orange rubber boot, and sealed switches
Shock and weather resistant (not designed for wet use due to high-voltage output)
